Sunday, March 9, 2014

Program A Bearcat Bc147xlt Scanner

Programming the Uniden BC147XLT scanner is an easy process. Uniden scanners are designed to make it easy for the user to program frequencies into the channels. Once you have the frequency that you would like to program into the scanner's memory, it can be entered into the device using the numeric keypad. Once a frequency is stored into the channel on the scanners memory, you only need to switch the scanner to the channel desired to listen to the traffic on that frequency.


Instructions


1. Turn the scanner on.


2. Press the Manual button. This will cause the unit to cease its scan.


3. Press the channel number that you are programming then press Manual again.


4. Enter the frequency that you wish to program using the numeric keypad. Be sure that you place the decimal in the correct place when entering the frequency into the scanner.


5. Press the E button. This will save the frequency into the scanner's memory.


Related Posts:




  • Program A Uniden Scanner

    Scanners can be programmed to monitor emergency services.Uniden is one of the top names in scanner manufacturers. The North American office sells Uniden products throughout North, Central and Sout...


  • Program A Uniden Bearcat Digital Handheld Scanner

    Program a Uniden Bearcat Digital Hand-Held ScannerDigital scanners decode digital transmissions broadcast over shortwave radio frequencies. The scanner's channel bank allows users to store frequen...


  • Use A Uniden Bearcat 170 Scanner

    With a Uniden Bearcat 170 Scanner, you can listen to police, county and city workers, buses and local government agencies. If someone is using a portable radio with a frequency within the ranges o...